Professional Series · Datasheet
Professional Series Ported 18" Enclosure Sundown Audio Z-Series ZV7 18 · Single 18" Ported enclosure
- Net volume
- 5.22 Cubic Feet
- Tuning
- 33.5 Hz
- Max mounting depth
- 15.610 Inches (Sundown Audio Spec)
- Cutout
- 16.680 Inches (Sundown Audio Spec)
- External dimensions
- 36.00 Inches W × 21.00 Inches H × 24.50 Inches D
- Front baffle
- Three 3/4" MDF layers, 2.25" total | Woofer Flush-Mounted In The Outer Layer
- Alignment: 5.22 cu ft net vented at 33.5 Hz. F3 28.1 Hz anechoic, 3.99 dB passband ripple
- Driver: Sundown Audio Z-Series ZV7 18 D2, 3500 W RMS, 42.0 mm Xmax, 27.25 Hz Fs
- Build: Front-firing standard box, 2.25" three-layer baffle with the woofer flush-mounted in the outer layer, Sundown Audio logo acrylic, dado joinery, 117.0 sq in front slot port beside the woofer with one bend along the back wall, port and excursion gated at 3500 W
- Cabinet: 36.00" W x 21.00" H x 24.50" D, 113 lb, threaded insert kit included
Spec of record
Technical specifications
| Series | Proline X Professional |
|---|---|
| Driver-Specific Fitment | Sundown Audio Z-Series ZV7 18 D2 (D2) |
| Enclosure Type | Ported | Front-Firing Standard Box |
| External Width | 36.00 Inches |
| External Height | 21.00 Inches |
| External Depth | 24.50 Inches |
| Internal Volume (Gross) | 8.37 Cubic Feet |
| Internal Volume (Net After Displacement) | 5.22 Cubic Feet |
| Port Type | Vertical Slot Beside The Woofer | Front Exit | One 90 Degree Bend Along The Back Wall |
| Port Geometry | 6.00 x 19.50 Inches, 117.0 Square Inches, 38.58 Inches Of Path |
| Port Area | 117.0 Square Inches |
| Port Tuning (Fb) | 33.5 Hz |
| Port Mouth | 1/2 In Roundover On All Four Edges, 143.5 Square Inches At The Face |
| Port Air Velocity | 19.4 m/s In The Channel, 15.8 m/s At The Mouth, At 3500 W (17.0 m/s Chuff Threshold) |
| Design Power Basis | 3500 W RMS (1.2 x The Driver Rating) For Port Velocity And Excursion |
| Predicted F3 | 28.1 Hz (Anechoic) |
| Passband Ripple | 3.99 dB (Anechoic) |
| Subsonic Filter | 26 Hz High-Pass, 24 dB/Octave - REQUIRED On A Vented Enclosure |
| Driver Fs | 27.25 Hz |
| Driver Qts | 0.421 |
| Driver Qes / Qms | 0.451 / 6.365 |
| Driver Vas | 94.970 Liters / 3.354 Cubic Feet |
| Driver Sd | 1217.6 Square Centimeters |
| Driver Mms | 756.36 g |
| Driver BL | 33.74 |
| Driver Re | 4.0 Ohm |
| Driver Xmax | 42mm (One-Way) |
| Driver Displacement | 0.34 Cubic Feet (Published by Sundown Audio) |
| Driver Sensitivity | 91.1 dB |
| Driver Power Handling | 3500 Watts RMS |
| Driver Overall Diameter | 18.500 Inches (Sundown Audio Spec) |
| Mounting Depth Required | 15.610 Inches (Sundown Audio Spec) |
| Cutout Diameter | 16.680 Inches (Sundown Audio Spec) |
| Flush Mount Recess | 19.500 Inches In The Outer Layer |
| Material | Langboard Elite 3/4" MDF |
| Construction | ShopSabre CNC / Two Windowed Braces Front To Back Either Side Of The Woofer |
| Joinery | Dado Joinery (CNC-Cut), Flat Panels |
| Front Baffle Construction | Three 3/4" MDF layers, 2.25" total | Woofer Flush-Mounted In The Outer Layer |
| Baffle Layers | 3 |
| Acrylic | Glossy Black Sundown Audio Logo Insert, Outer Layer, Standard |
| Mounting Hardware | Threaded Insert Kit Included: 8-12 Inserts, Drill Bit, 2.5 In Allen-Head Screws, Allen Key, Gasket Tape |
| Voice Coil Configuration | D2 |
| Terminal Cup | Proline X ABS/Carbon Fiber Composite | Back Panel, Terminal-Cup Side | 12g OFC Pre-Wired |
| Damping | None - Ships Dry. Polyfill Detunes A Ported Enclosure |
| Recommended Power | 2450-3500 Watts RMS (Sundown Audio Rated: 3500W RMS) |
| Carpet Finish | Plush Black |
| Shipping Weight | 122 lb |
| Shipping | Freight, Rated At Checkout |
| Bundle Options | Enclosure Only (Bring Your Own Sundown Audio Z-Series ZV7 18) |
| Warranty | 2-Year Limited (Enclosure) |
| Manufactured | Tullahoma, Tennessee, USA |
Modeled response
Performance in this enclosure
01Is this driver right for a ported box?
Efficiency bandwidth product places the motor before anything else is decided.
02What the box does to it
5.22 cu ft net against a 95.0 L Vas, vented at 33.5 Hz.
03Ported vs Sealed
No sealed comparison is shown for this driver.
04The watts that reach Xmax (in this enclosure)
Travel scales with the square root of power, so there is one wattage that puts the cone exactly on Sundown's published 42.0 mm. The two traces are the same cabinet with the subsonic filter switched on and switched off.
From the shop floor
Installer's take
I built this box for the ZV7 18 because it carries the deepest motor and the longest printed Xmax of any driver in this eighteen-inch run, and the D1 and D2 coils share the same basket, so one listing covers both.
The port stays clean past the coil's own 3500 watt rating, and Sundown doesn't say whether the driver's 42 mm Xmax is one-way or peak to peak, so I'm not stretching the excursion headroom on the strength of that number alone.
Wire the D2 coil in series for a nominal 4 ohms, or parallel for 1 ohm. Wire the D1 coil in series for a nominal 2 ohms, or parallel for 0.5 ohms only on an amplifier built for that load.
Sundown Audio publishes no mounting hole locations for the Z-Series ZV7 18, so the inserts are not in the baffle when the box arrives. The insert kit is in the box: set the inserts where the woofer's own holes fall, with the drill bit and the 2.5 inch allen-head screws in the kit, and lay the gasket tape before the woofer goes down.
It ships dry. Do not add polyfill to a ported box. Set your subsonic filter at 28 Hz.
Before you order
Questions
Why is this enclosure tuned to 33.5 Hz?
The port on this box stays clean past the D2 coil's own 3500 W rated power, so the chuff threshold sits outside the coil's rated range. Ripple across the passband holds at 3.99 dB on the 5.215 cubic feet net this cabinet gives the driver, the tightest response of this eighteen-inch run. Sundown publish full Fs, Qts, Qes and Qms for the ZV7 18, and the D1 and D2 coils share the same basket and frame, so one cabinet covers both. Tuning is chosen for in-car response rather than an anechoic curve: a vehicle adds roughly 12 dB per octave below about 45 Hz, and this tuning is where that sum comes out flattest across 25 to 60 Hz.
Why is this a Professional build and not a Performance Optimized box?
Every driver is run through the Performance Optimized wedge and down-fire before this chassis; the Professional box is where a driver lands when that smaller envelope, 30 inches wide and 18 inches deep with a triangular side port, cannot give it what it needs at its rated power. The Z-Series ZV7 18 does not fit that envelope at all: no rule: 18. This box is the chassis with the width, depth and port to carry it. An under-ported box does not fail quietly. Air speed at the mouth rises with power; past the chuff line the flow turns turbulent and the port is audible on every note. The turbulence also chokes the port, so the box behaves as if it were tuned higher than it is, loses output near tuning, and lets the cone travel further below tuning than the design allows. This chassis is a full-size front-firing box on a 2.25 inch baffle built from three 3/4 inch layers with the woofer flush-mounted in the outer layer, a Sundown Audio logo acrylic, and a port and excursion budget checked at 3500 W. It carries a 2 year warranty, against 1 year on the Performance Optimized lines.
Threaded inserts or a kit?
Sundown Audio does not publish the mounting hole locations for the Z-Series ZV7 18, so we cannot install the threaded inserts before it ships. The threaded insert kit comes in the box instead: 8 to 12 inserts sized to the woofer, the correct drill bit, 2.5 inch allen-head screws, an allen key and woofer gasket tape. You set the inserts when you mount the woofer; one kit serves one woofer. A dual cabinet ships two kits.
Do I need a subsonic filter?
Yes, at 26 Hz, 24 dB per octave. Below tuning a vented box stops loading the cone and excursion runs away toward DC. With the filter in place this cabinet puts the Sundown Audio Z-Series ZV7 18 at 29 percent of its usable travel at 3500 W.
Would a sealed box be better for me?
Not one we can show you. We do not build a sealed enclosure for the Sundown Audio Z-Series ZV7 18 and Sundown Audio mark it Not Recommended for a sealed enclosure, so the Performance Graphs tab carries no ported-versus-sealed chart: the only sealed box left to plot would be this cabinet stuffed and sealed, which nobody would build, and a comparison against it would tell you nothing you could buy. What a vented box gives up is the region below tuning, where the cone unloads and the 26 Hz subsonic filter takes over; around 33.5 Hz the vent carries the load and cone travel drops to its minimum, which no sealed alignment can do.
How does the front port work?
It is a vertical slot beside the woofer, the full height of the cavity, 6.00 inches wide and 117.0 square inches. It runs 14.75 inches to the back wall and turns once along it for 14.08 inches; the fold costs about 1.5 Hz and the port is cut for it. The channel runs at 19.4 meters per second at 3500 W, 21 percent of its turbulence limit, and the mouth edges carry a 1/2 inch roundover so the air leaves the face at 15.8 meters per second against the 17 meters per second threshold where a slot starts to chuff.
What does the price cover, and how does it ship?
113 lb, 36.00" W x 21.00" H x 24.50" D external. At this size it ships freight; the freight rate is calculated at checkout. Every Professional cabinet is priced the same way, by its size: this one is 10.72 cubic feet outside. At 113 lb it ships freight, quoted at checkout. Do not add polyfill; it ships dry on purpose.
Is the Z-Series ZV7 18 included?
No. This is an enclosure only, cut for the Sundown Audio Z-Series ZV7 18 specifically: the 16.680 inch cutout, the 15.610 inch mounting depth allowance and the 5.22 cubic foot alignment all come from Sundown Audio's published parameters. It fits both coil versions; the alignment published here is the D2. Bring your own driver.
Same series, same size
Other Professional Series models
Ampere Audio AA-2.75 18 Box:Single 18" Ported
Ampere Audio AA-3.0 18 Box:Single 18" Ported
DD Audio 9518L ESP Box:Single 18" Ported
Dayton Audio Reference RSS460HO Box:Single 18" Ported
Dayton Audio Ultimax II UMII18 Box:Single 18" Ported
Sundown Audio M-Series M18Single 18" Ported
Sundown Audio SDDN 18" Limited EditionSingle 18" Ported
Sundown Audio X-Series XV4 18Single 18" Ported