Professional Series · Datasheet
Professional Series Ported 18" Enclosure Sundown Audio M-Series M18 · Single 18" Ported enclosure
- Net volume
- 5.41 Cubic Feet
- Tuning
- 33.0 Hz
- Max mounting depth
- 14.050 Inches (Sundown Audio Spec)
- Cutout
- 16.680 Inches (Sundown Audio Spec)
- External dimensions
- 36.00 Inches W × 21.00 Inches H × 21.50 Inches D
- Front baffle
- Three 3/4" MDF layers, 2.25" total | Woofer Flush-Mounted In The Outer Layer
- Alignment: 5.41 cu ft net vented at 33.0 Hz. F3 26.6 Hz anechoic, 5.95 dB passband ripple
- Driver: Sundown Audio M-Series M18 D1, 2000 W RMS, 35.0 mm Xmax, 26.20 Hz Fs
- Build: Front-firing standard box, 2.25" three-layer baffle with the woofer flush-mounted in the outer layer, Sundown Audio logo acrylic, dado joinery, 87.8 sq in front slot port beside the woofer with one bend along the back wall, port and excursion gated at 2000 W
- Cabinet: 36.00" W x 21.00" H x 21.50" D, 103 lb, threaded insert kit included
Spec of record
Technical specifications
| Series | Proline X Professional |
|---|---|
| Driver-Specific Fitment | Sundown Audio M-Series M18 D1 (D1) |
| Enclosure Type | Ported | Front-Firing Standard Box |
| External Width | 36.00 Inches |
| External Height | 21.00 Inches |
| External Depth | 21.50 Inches |
| Internal Volume (Gross) | 7.20 Cubic Feet |
| Internal Volume (Net After Displacement) | 5.41 Cubic Feet |
| Port Type | Vertical Slot Beside The Woofer | Front Exit | One 90 Degree Bend Along The Back Wall |
| Port Geometry | 4.50 x 19.50 Inches, 87.8 Square Inches, 27.44 Inches Of Path |
| Port Area | 87.8 Square Inches |
| Port Tuning (Fb) | 33.0 Hz |
| Port Mouth | 1/2 In Roundover On All Four Edges, 112.8 Square Inches At The Face |
| Port Air Velocity | 17.2 m/s In The Channel, 13.4 m/s At The Mouth, At 2000 W (17.0 m/s Chuff Threshold) |
| Design Power Basis | 2000 W RMS (1.2 x The Driver Rating) For Port Velocity And Excursion |
| Predicted F3 | 26.6 Hz (Anechoic) |
| Passband Ripple | 5.95 dB (Anechoic) |
| Subsonic Filter | 26 Hz High-Pass, 24 dB/Octave - REQUIRED On A Vented Enclosure |
| Driver Fs | 26.20 Hz |
| Driver Qts | 0.684 |
| Driver Qes / Qms | 0.782 / 5.452 |
| Driver Vas | 112.182 Liters / 3.962 Cubic Feet |
| Driver Sd | 1147.5 Square Centimeters |
| Driver Mms | 651.24 g |
| Driver BL | 17.04 |
| Driver Re | 2.1 Ohm |
| Driver Xmax | 35mm (One-Way) |
| Driver Displacement | 0.25 Cubic Feet (Published by Sundown Audio) |
| Driver Sensitivity | 85.8 dB |
| Driver Power Handling | 2000 Watts RMS |
| Driver Overall Diameter | 18.460 Inches (Sundown Audio Spec) |
| Mounting Depth Required | 14.050 Inches (Sundown Audio Spec) |
| Cutout Diameter | 16.680 Inches (Sundown Audio Spec) |
| Flush Mount Recess | 19.375 Inches In The Outer Layer |
| Material | Langboard Elite 3/4" MDF |
| Construction | ShopSabre CNC / Two Windowed Braces Front To Back Either Side Of The Woofer |
| Joinery | Dado Joinery (CNC-Cut), Flat Panels |
| Front Baffle Construction | Three 3/4" MDF layers, 2.25" total | Woofer Flush-Mounted In The Outer Layer |
| Baffle Layers | 3 |
| Acrylic | Glossy Black Sundown Audio Logo Insert, Outer Layer, Standard |
| Mounting Hardware | Threaded Insert Kit Included: 8-12 Inserts, Drill Bit, 2.5 In Allen-Head Screws, Allen Key, Gasket Tape |
| Voice Coil Configuration | D1 |
| Terminal Cup | Proline X ABS/Carbon Fiber Composite | Back Panel, Terminal-Cup Side | 12g OFC Pre-Wired |
| Damping | None - Ships Dry. Polyfill Detunes A Ported Enclosure |
| Recommended Power | 1400-2000 Watts RMS (Sundown Audio Rated: 2000W RMS) |
| Carpet Finish | Plush Black |
| Shipping Weight | 112 lb |
| Shipping | Freight, Rated At Checkout |
| Bundle Options | Enclosure Only (Bring Your Own Sundown Audio M-Series M18) |
| Warranty | 2-Year Limited (Enclosure) |
| Manufactured | Tullahoma, Tennessee, USA |
Modeled response
Performance in this enclosure
01Is this driver right for a ported box?
Efficiency bandwidth product places the motor before anything else is decided.
02What the box does to it
5.41 cu ft net against a 112.2 L Vas, vented at 33.0 Hz.
03Perceived Ported vs Sealed
This cabinet, 5.41 cu ft net vented at 33.0 Hz, against Sundown Audio's recommended range (low end) sealed box, 5.00 cu ft.
04Real World Ported vs Sealed
The same two boxes with cabin gain applied, 45 Hz corner, 18 dB ceiling.
05The watts that reach Xmax (in this enclosure)
Travel scales with the square root of power, so there is one wattage that puts the cone exactly on Sundown's published 35.0 mm. The two traces are the same cabinet with the subsonic filter switched on and switched off.
From the shop floor
Installer's take
I built this box for the M18 because it needed the full 36 by 21 Professional envelope that an eighteen inch motor asks for, and the D1 and D2 coils share the same basket, so one listing covers both.
The port stays clean past the coil's own 2000 watt rating, so you are not going to hear it talk within the coil's rated range. Sundown doesn't say whether the printed 35 mm of Xmax is one-way or peak to peak, so I'm not stretching the excursion headroom on the strength of that number alone.
Wire the D1 coil in series for a nominal 2 ohms, or parallel for 0.5 ohms only on an amplifier built for that load. Wire the D2 coil in series for 4 ohms, or parallel for 1 ohm.
Sundown Audio publishes no mounting hole locations for the M-Series M18, so the inserts are not in the baffle when the box arrives. The insert kit is in the box: set the inserts where the woofer's own holes fall, with the drill bit and the 2.5 inch allen-head screws in the kit, and lay the gasket tape before the woofer goes down.
It ships dry. Do not add polyfill to a ported box. Set your subsonic filter at 28 Hz.
Before you order
Questions
Why is this enclosure tuned to 33.0 Hz?
The port on this box stays clean past the D1 coil's own 2000 W rated power, so the chuff threshold is never reached within the coil's rated range. Ripple across the passband holds at 5.95 dB, with F3 at 26.6 Hz on the 5.411 cubic feet net this cabinet gives the driver. Sundown publish full Fs, Qts, Qes and Qms for the M18, and those figures agree with each other, so the alignment behind this cabinet rests on the driver's own published numbers rather than a derived substitute. Tuning is chosen for in-car response rather than an anechoic curve: a vehicle adds roughly 12 dB per octave below about 45 Hz, and this tuning is where that sum comes out flattest across 25 to 60 Hz.
Why is this a Professional build and not a Performance Optimized box?
Every driver is run through the Performance Optimized wedge and down-fire before this chassis; the Professional box is where a driver lands when that smaller envelope, 30 inches wide and 18 inches deep with a triangular side port, cannot give it what it needs at its rated power. The M-Series M18 does not fit that envelope at all: no rule: 18. This box is the chassis with the width, depth and port to carry it. An under-ported box does not fail quietly. Air speed at the mouth rises with power; past the chuff line the flow turns turbulent and the port is audible on every note. The turbulence also chokes the port, so the box behaves as if it were tuned higher than it is, loses output near tuning, and lets the cone travel further below tuning than the design allows. This chassis is a full-size front-firing box on a 2.25 inch baffle built from three 3/4 inch layers with the woofer flush-mounted in the outer layer, a Sundown Audio logo acrylic, and a port and excursion budget checked at 2000 W. It carries a 2 year warranty, against 1 year on the Performance Optimized lines.
Threaded inserts or a kit?
Sundown Audio does not publish the mounting hole locations for the M-Series M18, so we cannot install the threaded inserts before it ships. The threaded insert kit comes in the box instead: 8 to 12 inserts sized to the woofer, the correct drill bit, 2.5 inch allen-head screws, an allen key and woofer gasket tape. You set the inserts when you mount the woofer; one kit serves one woofer. A dual cabinet ships two kits.
Do I need a subsonic filter?
Yes, at 26 Hz, 24 dB per octave. Below tuning a vented box stops loading the cone and excursion runs away toward DC. With the filter in place this cabinet puts the Sundown Audio M-Series M18 at 32 percent of its usable travel at 2000 W.
Would a sealed box be better for me?
Below about 23 Hz, yes. The maker's recommended sealed box is louder down there by up to 2.5 dB, because a sealed box rolls off gently into the subsonic region where a vented one falls away steeply once it is under tuning. Above that this alignment is the louder of the two for the same power. The Performance Graphs tab plots this cabinet, 5.41 cubic feet vented at 33.0 Hz, against Sundown Audio's recommended range (low end) sealed box, 5.00 cu ft, so you can see exactly where they cross.
How does the front port work?
It is a vertical slot beside the woofer, the full height of the cavity, 4.50 inches wide and 87.8 square inches. It runs 13.25 inches to the back wall and turns once along it for 5.94 inches; the fold costs about 1.5 Hz and the port is cut for it. The channel runs at 17.2 meters per second at 2000 W, 22 percent of its turbulence limit, and the mouth edges carry a 1/2 inch roundover so the air leaves the face at 13.4 meters per second against the 17 meters per second threshold where a slot starts to chuff.
What does the price cover, and how does it ship?
103 lb, 36.00" W x 21.00" H x 21.50" D external. At this size it ships freight; the freight rate is calculated at checkout. Every Professional cabinet is priced the same way, by its size: this one is 9.41 cubic feet outside. At 103 lb it ships freight, quoted at checkout. Do not add polyfill; it ships dry on purpose.
Is the M-Series M18 included?
No. This is an enclosure only, cut for the Sundown Audio M-Series M18 specifically: the 16.680 inch cutout, the 14.050 inch mounting depth allowance and the 5.41 cubic foot alignment all come from Sundown Audio's published parameters. It fits both coil versions; the alignment published here is the D1. Bring your own driver.
Same series, same size
Other Professional Series models
Ampere Audio AA-2.75 18 Box:Single 18" Ported
Ampere Audio AA-3.0 18 Box:Single 18" Ported
DD Audio 9518L ESP Box:Single 18" Ported
Dayton Audio Reference RSS460HO Box:Single 18" Ported
Dayton Audio Ultimax II UMII18 Box:Single 18" Ported
Sundown Audio SDDN 18" Limited EditionSingle 18" Ported
Sundown Audio X-Series XV4 18Single 18" Ported
Sundown Audio Z-Series ZV6 18" Z v.6Single 18" Ported