Shop

Performance Optimized · Datasheet

Performance Optimized Wedge Ported Dual 10" Enclosure Audiomobile EVO 2410 · Dual 10" Ported enclosure

Net volume
2.03 cu ft, one shared chamber
Tuning
34.0 Hz
External dimensions
32.00" W x 15" H
Front baffle
1.5 in double baffle
Buy at Audio IntensityFactory-direct, ships from Tullahoma
Audiomobile EVO 2410Buy at Audio Intensity
  • Alignment: 2.03 cu ft net shared vented at 34.0 Hz
  • Drivers: Pair of Audiomobile EVO 2410, 500 W RMS, S4 or D4
  • Port: Triangular side slot, 30.1 sq in
  • Cabinet: 32.00" W x 15" H x 12.25/17.71" D

Spec of record

Technical specifications

SeriesProline X Performance Optimized Ported Wedge
Compatible DriverAudiomobile EVO 2410, S4 or D4, quantity 2. Direct fit
External Dimensions32.00" W x 15" H, 17.71" D at the base tapering to 12.25" at the top
Internal Volume, Net2.03 cu ft, one shared chamber
Tuning34.0 Hz
PortTriangular side slot, 30.1 sq in, 26.1 in path
AlignmentAudiomobile's recommended box, tuned to 34 Hz; not modeled (no Qes published)
Driver Openings9.2 in cutout, 10.65 in recess, x2 at 8.625 / 23.375 in
Driver MountingThreaded insert kit included, NOT pre-installed: no published bolt circle
Motor Clearance4.79 in to the port panel
Bracing2 windowed C braces
MaterialLangboard Elite MDF, V-groove and dado joinery
Front Baffle1.5 in double baffle
Terminal CupOne, side mounted, pre wired 12 gauge OFC to both drivers
Acrylic InsertGloss black acrylic baffle insert standard
DampingNone, ships dry
CarpetPlush black
Shipping Weight63 lb
Warranty1 Year Limited
Built InTullahoma, Tennessee

From the shop floor

Installer's take

Audiomobile's own ported box for the EVO: 1.0 cubic feet per driver at 34 Hz. No Qes is published, so there is no modeled curve on this page, only the maker's box built properly.

The port is scaled from the GT2 dual's by cone displacement; I estimate 13 m/s at the mouth at full power.

No bolt circle is published, so the inserts ship in the kit. Ships dry, subsonic near 28 Hz.

Before you order

Questions

Why is this enclosure tuned to 34.0 Hz?

This cabinet is built to Audiomobile's own ported box for the EVO 2410: 2.03 cubic feet net in one shared chamber, 1.02 per driver, the top of the 0.65 to 1.0 range Audiomobile gives, tuned to 34 Hz through a 30.1 square inch triangular port across the pair. Audiomobile does not publish the motor figures (Qes, Qms or Bl) a ported model needs, so this page does not print a modeled F3, ripple or excursion curve the way our other ported pages do: the volume and tuning are the maker's box, not a result of our solver. The port area is scaled from the GT2 2010 dual's solved port by the EVO's larger cone displacement, so it moves the extra air at the same velocity: an estimated 13 m/s at the mouth with both drivers at 500 watts.

Why the 20 degree wedge, and why rear-firing?

The rake on the back matches a factory rear seat so the cabinet sits flush and the trunk floor in front stays usable; the baffle is vertical and fires rearward, using the trunk as an acoustic extension.

Do I need a subsonic filter?

Yes. Below 34.0 Hz the port no longer controls the cones; set the filter near 28 Hz.

How much power can I run, and at what impedance?

Audiomobile rates the EVO 2410 at 500 watts RMS per driver, 1000 across the pair; aim for 350 to 500 per driver. A pair of dual 4 ohm EVOs wires to 4 ohms (coils in series, pair in parallel) or 1 ohm; a pair of single 4 ohm EVOs to 2 or 8 ohms.

Would a sealed box be better for me?

Our sealed EVO wedges hold 0.65 cubic feet per driver at Qtc 0.82, firm and compact. This ported box trades size for more output near 34 Hz on Audiomobile's own ported volume.

How does the side port work?

The port is a triangular slot along the back, 26.1 inches of path, exiting through the side panel with a rounded mouth so the air leaves without a sharp edge to chuff on.

Does this enclosure ship with polyfill?

No, and do not add any: fill in a ported box detunes it.

Is the EVO 2410 included?

No. This is an enclosure only, for a pair you supply. You receive the cabinet in plush black carpet with the gloss black acrylic insert, the side-mounted pre-wired terminal cup and a threaded insert kit with stainless machine screws.

Same series, same size

Other Performance Optimized models