Professional Series Ported 10" Enclosure JL Audio 10W7AE · Single 10" Ported enclosure

The port on this box stays clean up to 356 W before the mouth velocity crosses the chuff threshold, against the coil's own 750 W power rating; JL Audio's own T/S are published in full, so this alignment rests on numbers the manufacturer stands behind rather than a derived substitute. Ripple across the passband holds at 2.64 dB, and the in-car curve stays tight across the passband rather than peaking at either end. There is no sealed reference for the 10W7AE in our data, so no sealed-versus-ported comparison is offered for this driver. Tuning is chosen for in-car response rather than an anechoic curve: a vehicle adds roughly 12 dB per octave below about 45 Hz, and this tuning is where that sum comes out flattest across 25 to 60 Hz.

The box. A Performance Optimized cabinet is cut to fit a trunk shape on a 1.5 inch double baffle; this one is a full-size front-firing box on a 2.25 inch triple baffle with the woofer flush-mounted in the outer layer, JL Audio logo acrylic, and a port checked at 1125 W rather than the rating. It carries a 2 year warranty against 1.

Threaded insert kit included for customer installation: 8 to 12 inserts sized to the woofer, the correct drill bit, 2.5 inch allen-head screws, allen key and gasket tape. One kit serves one woofer; a dual cabinet ships two.

Yes, at 26 Hz, 24 dB per octave. Below tuning a vented box stops loading the cone and excursion runs away toward DC. With the filter in place this cabinet puts the JL Audio 10W7AE at 64 percent of its usable travel at 1125 W.

Not one we can show you. We do not build a sealed enclosure for the JL Audio 10W7AE and JL Audio publish no sealed volume for it, so the Performance Graphs tab carries no ported-versus-sealed chart: the only sealed box left to plot would be this cabinet stuffed and sealed, which nobody would build, and a comparison against it would tell you nothing you could buy. What a vented box gives up is the region below tuning, where the cone unloads and the 26 Hz subsonic filter takes over; around 33.0 Hz the vent carries the load and cone travel drops to its minimum, which no sealed alignment can do.

It is a vertical slot beside the woofer, 22.0 square inches, tuned to 33.0 Hz. The port stays under the chuff threshold up to 356 W; above that the air at the mouth moves faster than the 17 metres per second where a slot starts to chuff.

48 lb, 32.00" W x 12.50" H x 15.00" D external. It ships as a UPS parcel; the price includes shipping in the 48 states. Do not add polyfill; it ships dry on purpose.

No. This is an enclosure only, cut for the JL Audio 10W7AE specifically: the 8.740 inch cutout and the 7.992 inch mounting depth allowance come from JL Audio's published parameters. Bring your own driver.