Professional Series · Datasheet
AudioControl Space SPC-12 Dual Box: Ported 12" Shallow Professional Series Enclosure Dual 12" Ported enclosure
- Net volume
- 2.81 Cubic Feet
- Tuning
- 31.0 Hz
- Max mounting depth
- 3.940 Inches (AudioControl Spec)
- Cutout
- 11.100 Inches (AudioControl Spec)
- External dimensions
- 42.00 Inches W × 16.00 Inches H × 13.50 Inches D
- Front baffle
- Three 3/4" MDF layers, 2.25" total | Woofer Flush-Mounted In The Outer Layer
- Alignment: 2.81 cu ft net vented at 31.0 Hz. F3 36.4 Hz anechoic, 0.61 dB passband ripple
- Driver: AudioControl Space SPC-12 Single 2 Ohm, 400 W RMS, 9.0 mm Xmax, 27.84 Hz Fs
- Build: Front-firing standard box, 2.25" three-layer baffle with the woofer flush-mounted in the outer layer, AudioControl logo acrylic, dado joinery, 32.6 sq in front slot port beside the woofer with one bend along the back wall, port and excursion gated at 960 W
- Cabinet: 42.00" W x 16.00" H x 13.50" D, 62 lb, threaded insert kit included
Spec of record
Technical specifications
| Series | Proline X Professional |
|---|---|
| Driver-Specific Fitment | AudioControl Space SPC-12 Single 2 Ohm (SPC-12S2 single 2 ohm or SPC-12S4 single 4 ohm) |
| Enclosure Type | Ported | Front-Firing Standard Box |
| External Width | 42.00 Inches |
| External Height | 16.00 Inches |
| External Depth | 13.50 Inches |
| Internal Volume (Gross) | 3.48 Cubic Feet |
| Internal Volume (Net After Displacement) | 2.81 Cubic Feet |
| Port Type | Vertical Slot Beside The Woofer | Front Exit | One 90 Degree Bend Along The Back Wall |
| Port Geometry | 2.25 x 14.50 Inches, 32.6 Square Inches, 23.86 Inches Of Path |
| Port Area | 32.6 Square Inches |
| Port Tuning (Fb) | 31.0 Hz |
| Port Mouth | 1/2 In Roundover On All Four Edges, 50.4 Square Inches At The Face |
| Port Air Velocity | 19.6 m/s In The Channel, 12.7 m/s At The Mouth, At 960 W (17.0 m/s Chuff Threshold) |
| Design Power Basis | 960 W RMS (1.2 x The Driver Rating) For Port Velocity And Excursion |
| Predicted F3 | 36.4 Hz (Anechoic) |
| Passband Ripple | 0.61 dB (Anechoic) |
| Subsonic Filter | 24 Hz High-Pass, 24 dB/Octave - REQUIRED On A Vented Enclosure |
| Driver Fs | 27.84 Hz |
| Driver Qts | 0.422 |
| Driver Qes / Qms | 0.470 / 4.076 |
| Driver Vas | 74.558 Liters / 2.633 Cubic Feet |
| Driver Sd | 511.0 Square Centimeters |
| Driver Mms | 159.61 g |
| Driver BL | 10.34 |
| Driver Re | 1.8 Ohm |
| Driver Xmax | 9mm (One-Way) |
| Driver Displacement | 0.06 Cubic Feet (Published by AudioControl) |
| Driver Sensitivity | 87.4 dB |
| Driver Power Handling | 400 Watts RMS |
| Driver Overall Diameter | 12.370 Inches (AudioControl Spec) |
| Mounting Depth Required | 3.940 Inches (AudioControl Spec) |
| Cutout Diameter | 11.100 Inches (AudioControl Spec) |
| Flush Mount Recess | 13.375 Inches In The Outer Layer |
| Material | Langboard Elite 3/4" MDF |
| Construction | ShopSabre CNC / Windowed Brace Front To Back Beside The Woofer |
| Joinery | Dado Joinery (CNC-Cut), Flat Panels |
| Front Baffle Construction | Three 3/4" MDF layers, 2.25" total | Woofer Flush-Mounted In The Outer Layer |
| Baffle Layers | 3 |
| Acrylic | Glossy Black AudioControl Logo Insert, Outer Layer, Standard |
| Mounting Hardware | Threaded Insert Kit Included: 8-12 Inserts, Drill Bit, 2.5 In Allen-Head Screws, Allen Key, Gasket Tape |
| Voice Coil Configuration | Single 2 Ohm |
| Terminal Cup | Proline X ABS/Carbon Fiber Composite | Back Panel, Terminal-Cup Side | 12g OFC Pre-Wired |
| Damping | None - Ships Dry. Polyfill Detunes A Ported Enclosure |
| Recommended Power | 280-400 Watts RMS (AudioControl Rated: 400W RMS) |
| Carpet Finish | Plush Black |
| Shipping Weight | 70 lb |
| Shipping | UPS Ground Parcel, Included In The 48 States |
| Bundle Options | Enclosure Only (Bring Your Own AudioControl Space SPC-12) |
| Warranty | 2-Year Limited (Enclosure) |
| Manufactured | Tullahoma, Tennessee, USA |
Modelled response
Performance in this enclosure
01Is this driver right for a ported box?
Efficiency bandwidth product places the motor before anything else is decided.
02What the box does to it
2.81 cu ft net against a 149.1 L Vas, vented at 31.0 Hz.
03Ported vs Sealed
No sealed comparison is shown for this driver.
04The watts that reach Xmax (in this enclosure)
Travel scales with the square root of power, so there is one wattage that puts both cones exactly on AudioControl's published 9.0 mm. The two traces are the same cabinet with the subsonic filter switched on and switched off. Every power figure in this section is for the pair, split evenly.
From the shop floor
Installer's take
I built this one for a pair of Space SPC-12 in a single shared chamber, which is how a dual ported box should be built: one volume, one port, both drivers loading the same air.
It gets the full Professional treatment, a 2.25 inch three-layer baffle with both woofers flush mounted in the outer layer, and the port on the left of the face.
Wiring is where a dual bites you. A pair of SPC-12S2 (one 2 ohm coil each) is 1 ohms in parallel or 4 ohms in series. A pair of SPC-12S4 (one 4 ohm coil each) is 2 ohms in parallel or 8 ohms in series. Check what your amplifier is rated for before you wire it, not after.
AudioControl publishes no mounting hole locations for the Space SPC-12, so the inserts are not in the baffle when the box arrives. The insert kit is in the box: set the inserts where the woofer's own holes fall, with the drill bit and the 2.5 inch allen-head screws in the kit, and lay the gasket tape before the woofer goes down.
It ships dry. Do not add polyfill to a ported box. Set your subsonic filter at 24 Hz.
Before you order
Questions
Why is this enclosure tuned to 31.0 Hz?
Both drivers share one chamber and one port rather than sitting in separate boxes, so the pair works against the whole volume and the port is sized for the pair rather than doubled. The port carries 32.6 square inches of area at 31.0 Hz, and the design power for the velocity and excursion checks is 960 W for the pair. Passband ripple holds at 0.61 dB across the tuning, with F3 at 36.4 Hz. Tuning is chosen for in-car response rather than an anechoic curve: a vehicle adds roughly 12 dB per octave below about 45 Hz, and this tuning is where that sum comes out flattest across 25 to 60 Hz.
Why is this a Professional build and not a Performance Optimized box?
A single Space SPC-12 also builds in the Performance Optimized ported wedge and ported down-fire, the smaller and cheaper single-driver boxes. A pair takes this Professional cabinet: one shared chamber on a 2.25 inch three-layer baffle with both woofers flush in the outer layer, and a slot port gated at 960 W for the pair. It carries a 2 year warranty, against 1 year on the Performance Optimized lines.
Threaded inserts or a kit?
AudioControl does not publish the mounting hole locations for the Space SPC-12, so we cannot install the threaded inserts before it ships. The threaded insert kit comes in the box instead: inserts sized to the woofer, the correct drill bit, 2.5 inch allen-head screws, an allen key and woofer gasket tape. You set the inserts when you mount the woofer, and this box ships with two kits, one per woofer.
Do I need a subsonic filter?
Yes, at 24 Hz, 24 dB per octave. Below tuning a vented box stops loading the cone and excursion runs away toward DC. With the filter in place this cabinet puts the AudioControl Space SPC-12 at 83 percent of its usable travel at 960 W.
Would a sealed box be better for me?
Not one we can show you. We do not build a sealed enclosure for the AudioControl Space SPC-12 and AudioControl publish no sealed volume for it, so the Performance Graphs tab carries no ported-versus-sealed chart: the only sealed box left to plot would be this cabinet stuffed and sealed, which nobody would build, and a comparison against it would tell you nothing you could buy. What a vented box gives up is the region below tuning, where the cone unloads and the 24 Hz subsonic filter takes over; around 31.0 Hz the vent carries the load and cone travel drops to its minimum, which no sealed alignment can do.
How does the front port work?
It is a vertical slot beside the woofer, the full height of the cavity, 2.25 inches wide and 32.6 square inches. It runs 7.50 inches to the back wall and turns once along it for 10.36 inches; the fold costs about 1.5 Hz and the port is cut for it. The channel runs at 19.6 metres per second at 960 W, 51 percent of its turbulence limit, and the mouth edges carry a 1/2 inch roundover so the air leaves the face at 12.7 metres per second against the 17 metres per second threshold where a slot starts to chuff.
What does the price cover, and how does it ship?
62 lb, 42.00" W x 16.00" H x 13.50" D external. Every Professional cabinet is priced the same way, by its size: this one is 5.25 cubic feet outside. Delivery to the 48 states is inside the price; it ships as a 62 lb parcel and checkout adds nothing. Do not add polyfill; it ships dry on purpose.
Is the Space SPC-12 included?
No. This is an enclosure only, cut for the AudioControl Space SPC-12 specifically: the 11.100 inch cutout, the 3.940 inch mounting depth allowance and the 2.81 cubic foot alignment all come from AudioControl's published parameters. It fits both AudioControl versions. The pair is tuned on the SPC-12S2 (single 2 ohm), F3 36.4 Hz; a pair of SPC-12S4 (single 4 ohm) was run through the same cabinet and lands at F3 38.6 Hz with 0.9 dB of ripple, each cone 7.4 of its 9 mm. Bring your own driver.
Same series, same size
Alpine R2-W12
Alpine R2-W12
American Bass DX 12
American Bass ES 12
American Bass Elite 12
American Bass SL 12
American Bass Titan 12
American Bass Titanium 12