Professional Series · Datasheet
Professional Series Ported 15" Enclosure Sundown Audio U-Series v.1 15 · Single 15" Ported enclosure
- Net volume
- 2.52 Cubic Feet
- Tuning
- 34.0 Hz
- Max mounting depth
- 9.050 Inches (Sundown Audio Spec)
- Cutout
- 14.010 Inches (Sundown Audio Spec)
- External dimensions
- 36.00 Inches W × 18.00 Inches H × 15.00 Inches D
- Front baffle
- Three 3/4" MDF layers, 2.25" total | Woofer Flush-Mounted In The Outer Layer
- Alignment: 2.52 cu ft net vented at 34.0 Hz. F3 31.6 Hz anechoic, 0.16 dB passband ripple
- Driver: Sundown Audio U-Series v.1 15 D2, 1500 W RMS, 30.0 mm Xmax, 37.90 Hz Fs
- Build: Front-firing standard box, 2.25" three-layer baffle with the woofer flush-mounted in the outer layer, Sundown Audio logo acrylic, dado joinery, 49.5 sq in front slot port beside the woofer with one bend along the back wall, port and excursion gated at 1500 W
- Cabinet: 36.00" W x 18.00" H x 15.00" D, 68 lb, threaded insert kit included
Spec of record
Technical specifications
| Series | Proline X Professional |
|---|---|
| Driver-Specific Fitment | Sundown Audio U-Series v.1 15 D2 (D2) |
| Enclosure Type | Ported | Front-Firing Standard Box |
| External Width | 36.00 Inches |
| External Height | 18.00 Inches |
| External Depth | 15.00 Inches |
| Internal Volume (Gross) | 3.95 Cubic Feet |
| Internal Volume (Net After Displacement) | 2.52 Cubic Feet |
| Port Type | Vertical Slot Beside The Woofer | Front Exit | One 90 Degree Bend Along The Back Wall |
| Port Geometry | 3.00 x 16.50 Inches, 49.5 Square Inches, 34.84 Inches Of Path |
| Port Area | 49.5 Square Inches |
| Port Tuning (Fb) | 34.0 Hz |
| Port Mouth | 1/2 In Roundover On All Four Edges, 70.0 Square Inches At The Face |
| Port Air Velocity | 20.4 m/s In The Channel, 14.4 m/s At The Mouth, At 1500 W (17.0 m/s Chuff Threshold) |
| Design Power Basis | 1500 W RMS (1.2 x The Driver Rating) For Port Velocity And Excursion |
| Predicted F3 | 31.6 Hz (Anechoic) |
| Passband Ripple | 0.16 dB (Anechoic) |
| Subsonic Filter | 27 Hz High-Pass, 24 dB/Octave - REQUIRED On A Vented Enclosure |
| Driver Fs | 37.90 Hz |
| Driver Qts | 0.310 |
| Driver Qes / Qms | 0.340 / 3.100 |
| Driver Vas | 54.000 Liters / 1.907 Cubic Feet |
| Driver Sd | 872.1 Square Centimeters |
| Driver Mms | 355.70 g |
| Driver BL | 30.70 |
| Driver Re | 3.8 Ohm |
| Driver Xmax | 30mm (One-Way) |
| Driver Displacement | 0.24 Cubic Feet (Published by Sundown Audio) |
| Driver Sensitivity | 91.2 dB |
| Driver Power Handling | 1500 Watts RMS |
| Driver Overall Diameter | 15.590 Inches (Sundown Audio Spec) |
| Mounting Depth Required | 9.050 Inches (Sundown Audio Spec) |
| Cutout Diameter | 14.010 Inches (Sundown Audio Spec) |
| Flush Mount Recess | 16.500 Inches In The Outer Layer |
| Material | Langboard Elite 3/4" MDF |
| Construction | ShopSabre CNC / Two Windowed Braces Front To Back Either Side Of The Woofer |
| Joinery | Dado Joinery (CNC-Cut), Flat Panels |
| Front Baffle Construction | Three 3/4" MDF layers, 2.25" total | Woofer Flush-Mounted In The Outer Layer |
| Baffle Layers | 3 |
| Acrylic | Glossy Black Sundown Audio Logo Insert, Outer Layer, Standard |
| Mounting Hardware | Threaded Insert Kit Included: 8-12 Inserts, Drill Bit, 2.5 In Allen-Head Screws, Allen Key, Gasket Tape |
| Voice Coil Configuration | D2 |
| Terminal Cup | Proline X ABS/Carbon Fiber Composite | Back Panel, Terminal-Cup Side | 12g OFC Pre-Wired |
| Damping | None - Ships Dry. Polyfill Detunes A Ported Enclosure |
| Recommended Power | 1050-1500 Watts RMS (Sundown Audio Rated: 1500W RMS) |
| Carpet Finish | Plush Black |
| Weight | 68 lb |
| Shipping | UPS Ground Parcel, Included In The 48 States |
| Bundle Options | Enclosure Only (Bring Your Own Sundown Audio U-Series v.1 15) |
| Warranty | 2-Year Limited (Enclosure) |
| Manufactured | Tullahoma, Tennessee, USA |
Modelled response
Performance in this enclosure
01Is this driver right for a ported box?
Efficiency bandwidth product places the motor before anything else is decided.
02What the box does to it
2.52 cu ft net against a 54.0 L Vas, vented at 34.0 Hz.
03Perceived Ported vs Sealed
This cabinet, 2.52 cu ft net vented at 34.0 Hz, against Sundown Audio's recommended sealed box, 2.00 cu ft.
04Real World Ported vs Sealed
The same two boxes with cabin gain applied, 45 Hz corner, 18 dB ceiling.
05The watts that reach Xmax (in this enclosure)
Travel scales with the square root of power, so there is one wattage that puts the cone exactly on Sundown's published 30.0 mm. The two traces are the same cabinet with the subsonic filter switched on and switched off.
From the shop floor
Installer's take
I built this box around the U-Series v.1 15 because it tunes flat and stays that way, without needing any correction to get there. It gets the full Professional treatment: three-layer 2.25 inch baffle, the woofer flush mounted in the outer layer, and the port on the left of the face.
This port stays clean well past the coil's own 1500 watt rating, so the coil's heat is what limits you here, not the port. Both the D2 and D4 coils fit this same cabinet, so pick whichever winding matches your amplifier.
Wire the D2 coil in series for a nominal 4 ohms or parallel for 1 ohm, and wire the D4 coil in series for a nominal 8 ohms or parallel for 2 ohms; a parallel load under 1 ohm needs an amplifier rated for it, though neither of these windings goes that low.
Sundown Audio publishes no mounting hole locations for the U-Series v.1 15, so the inserts are not in the baffle when the box arrives. The insert kit is in the box: set the inserts where the woofer's own holes fall, with the drill bit and the 2.5 inch allen-head screws in the kit, and lay the gasket tape before the woofer goes down.
The Performance Optimized wedge is the smaller and cheaper box, and I try it first for every driver. I could not make its port keep up with the U-Series v.1 15: the calmest port that fits that envelope goes noisy at about 1054 watts, under what this coil is rated to take, so I did not sell you that box.
It ships dry. Do not add polyfill to a ported box. Set your subsonic filter at 29 Hz.
Before you order
Questions
Why is this enclosure tuned to 34.0 Hz?
At the coil's rated power of 1500 W the port on this box is nowhere near the chuff line; it stays clean all the way to 2091 W before the mouth velocity crosses it, so the coil's own heat is the limit here, not the port. Sundown publish a Qts of 0.31 for the D2 coil, with the Qes and Qms behind it in close agreement, describing a driver damped enough to sit flat rather than peak anywhere in the passband. Ripple across the passband holds at 0.16 dB, essentially flat, and the in-car curve stays close to that same line. Tuning is chosen for in-car response rather than an anechoic curve: a vehicle adds roughly 12 dB per octave below about 45 Hz, and this tuning is where that sum comes out flattest across 25 to 60 Hz.
Why is this a Professional build and not a Performance Optimized box?
Every driver is run through the Performance Optimized wedge and down-fire before this chassis; the Professional box is where a driver lands when that smaller envelope, 30 inches wide and 18 inches deep with a triangular side port, cannot give it what it needs at its rated power. The U-Series v.1 15 did not clear the port gate there. The calmest wedge port that fits that envelope is 32.0 square inches at 26.0 by 11.12 by 17.86 inches, and its mouth runs 20.3 metres per second at 1500 W against the 17 metres per second line where a port starts to chuff. That port would stay clean to about 1054 W. The slot on this box reaches 49.5 square inches and holds the mouth at 14.4 metres per second at 1500 W. An under-ported box does not fail quietly. Air speed at the mouth rises with power; past the chuff line the flow turns turbulent and the port is audible on every note. The turbulence also chokes the port, so the box behaves as if it were tuned higher than it is, loses output near tuning, and lets the cone travel further below tuning than the design allows. This chassis is a full-size front-firing box on a 2.25 inch baffle built from three 3/4 inch layers with the woofer flush-mounted in the outer layer, a Sundown Audio logo acrylic, and a port and excursion budget checked at 1500 W. It carries a 2 year warranty against 1.
Threaded inserts or a kit?
Sundown Audio does not publish the mounting hole locations for the U-Series v.1 15, so we cannot install the threaded inserts before it ships. The threaded insert kit comes in the box instead: 8 to 12 inserts sized to the woofer, the correct drill bit, 2.5 inch allen-head screws, an allen key and woofer gasket tape. You set the inserts when you mount the woofer; one kit serves one woofer. A dual cabinet ships two kits.
Do I need a subsonic filter?
Yes, at 27 Hz, 24 dB per octave. Below tuning a vented box stops loading the cone and excursion runs away toward DC. With the filter in place this cabinet puts the Sundown Audio U-Series v.1 15 at 27 percent of its usable travel at 1500 W.
Would a sealed box be better for me?
Below about 23 Hz, yes. The maker's recommended sealed box is louder down there by up to 3.6 dB, because a sealed box rolls off gently into the subsonic region where a vented one falls away steeply once it is under tuning. Above that this alignment is the louder of the two for the same power. The Performance Graphs tab plots this cabinet, 2.52 cubic feet vented at 34.0 Hz, against Sundown Audio's recommended sealed box, 2.00 cu ft, so you can see exactly where they cross.
How does the front port work?
It is a vertical slot beside the woofer, the full height of the cavity, 3.00 inches wide and 49.5 square inches. It runs 8.25 inches to the back wall and turns once along it for 19.84 inches; the fold costs about 1.5 Hz and the port is cut for it. The channel runs at 20.4 metres per second at 1500 W, 37 percent of its turbulence limit, and the mouth edges carry a 1/2 inch roundover so the air leaves the face at 14.4 metres per second against the 17 metres per second threshold where a slot starts to chuff.
What does the price cover, and how does it ship?
68 lb, 36.00" W x 18.00" H x 15.00" D external. It ships as a UPS parcel; the price includes shipping in the 48 states. Every Professional cabinet is priced the same way, by its size: this one is 5.62 cubic feet outside. Delivery to the 48 states is inside the price; it ships as a 68 lb parcel and checkout adds nothing. Do not add polyfill; it ships dry on purpose.
Is the U-Series v.1 15 included?
No. This is an enclosure only, cut for the Sundown Audio U-Series v.1 15 specifically: the 14.010 inch cutout, the 9.050 inch mounting depth allowance and the 2.52 cubic foot alignment all come from Sundown Audio's published parameters. It fits both coil versions; the alignment published here is the D2. Bring your own driver.
Same series, same size
DD Audio 715f
Image Dynamics IDMAX15 V4
Sundown Audio U-Series v.1 15
DD Audio 715f
Ground Zero GZHW 38
Image Dynamics IDMAX15 V4
Prodigy Audio NB5-15