Professional Series Ported 15" Enclosure Memphis Audio MOJO1512 · Single 15" Ported enclosure

Memphis's MOJO sheet gives the MOJO1512 Fs 30 Hz, Vas 2.86 cubic feet and 387 grams of moving mass, and those agree with its own compliance and cone area to within a few percent. The FLEX jumper changes only the electrical side, Qts 0.59 at the 2 ohm setting and 0.69 at 1 ohm, so the cabinet is solved at 2 ohms and checked at 1. At 2 ohms F3 is 33.0 Hz with 2.27 dB of passband ripple, at 1 ohm 33.1 Hz with 3.20 dB, and with cabin gain the curve holds within 0.87 dB from 25 to 60 Hz. At 1800 watts, 1.2 times the rating, the cone uses 10.9 of its 19.6 millimetres and the port mouth runs 13.2 metres per second, under the 17 where a slot starts to chuff. Tuning is chosen for in-car response rather than an anechoic curve: a vehicle adds roughly 12 dB per octave below about 45 Hz, and this tuning is where that sum comes out flattest across 25 to 60 Hz.

The Professional line is the full-size, front-firing option rather than a trunk wedge. This chassis is a full-size front-firing box on a 2.25 inch baffle built from three 3/4 inch layers with the woofer flush-mounted in the outer layer, a Memphis Audio logo acrylic, and a port and excursion budget checked at 1800 W. It carries a 2 year warranty, against 1 year on the Performance Optimized lines.

Memphis Audio does not publish the mounting hole locations for the MOJO1512, so we cannot install the threaded inserts before it ships. The threaded insert kit comes in the box instead: inserts sized to the woofer, the correct drill bit, 2.5 inch allen-head screws, an allen key and woofer gasket tape. You set the inserts when you mount the woofer, and this box ships with one kit.

Yes, at 25 Hz, 24 dB per octave. Below tuning a vented box stops loading the cone and excursion runs away toward DC. With the filter in place this cabinet puts the Memphis Audio MOJO1512 at 56 percent of its usable travel at 1800 W.

Not one we can show you. We do not build a sealed enclosure for the Memphis Audio MOJO1512, and the sealed volume Memphis prints for it appears word for word on three different Memphis 15 inch sheets, so the Performance Graphs tab carries no ported-versus-sealed chart: the only sealed box left to plot would be this cabinet stuffed and sealed, which nobody would build, and a comparison against it would tell you nothing you could buy. What a vented box gives up is the region below tuning, where the cone unloads and the 25 Hz subsonic filter takes over; around 32.0 Hz the vent carries the load and cone travel drops to its minimum, which no sealed alignment can do.

It is a vertical slot beside the woofer, the full height of the cavity, 2.50 inches wide and 41.2 square inches. It runs 8.75 inches to the back wall and turns once along it for 21.47 inches; the fold costs about 1.5 Hz and the port is cut for it. The channel runs at 19.7 metres per second at 1800 W, 44 percent of its turbulence limit, and the mouth edges carry a 1/2 inch roundover so the air leaves the face at 13.2 metres per second against the 17 metres per second threshold where a slot starts to chuff.

69 lb, 36.00" W x 18.00" H x 15.00" D external. It ships as a UPS parcel; the price includes shipping in the 48 states. Every Professional cabinet is priced the same way, by its size: this one is 5.62 cubic feet outside. Do not add polyfill; it ships dry on purpose.

No. This is an enclosure only, cut for the Memphis Audio MOJO1512 specifically: the 14.050 inch cutout, the 9.650 inch mounting depth allowance and the 2.30 cubic foot alignment all come from Memphis Audio's published parameters. It is one driver with a FLEX impedance jumper: the alignment published here is the 2 ohm setting, and the cabinet passes every gate at 1 ohm too. It is not for the 2025 MJ1512, which uses a 13.81 inch cutout. Bring your own driver.